Lindapter high slip resistance girder clamp type AAF M16 hot dip galvanized
Note: The images are an indicative representation of the product. Technical details can be found in the sections below.
Product information
| pgb article number | LNAAF0010166 |
| EAN code | 5051324003869 |
| Alternative article number | AAF16 |
| Functional name | Girder clamp |
| Packing type | Factory packing |
| Packaging quantity | 10 |
| Brand name | LINDAPTER |
| Material | Malleable iron |
| Surface | Hot dip galvanized |
| Type | Type AAF |
| M | Metric thread | M16 |
| y | 34-50 | |
| Installation environment | C3 - General outdoor use, 10 km from the coast | |
Advantages
| - High slip resistance evaluated for tensile, frictional and combined load applications |
| - The tail spans slotted clearance holes |
Applications
| - Suitable for parallel and tapered flanges up to and including 10° |
| - Self-adjusts to suit flange thicknesses 6mm to 40mm (size M20) |
| - Safe working loads apply in temperatures as low as -60°C |
| Lindapter recommends the use of DTI Washers conforming to EN14399-9 with the Type AAF. |
| Independently approved for dynamic load applications to EN 1993-1-9. |
| The Type AAF girder clamp is used to achieve a fast steelwork fixing connection where high load capacities are present in either tensile, frictional or combined load directions. It features an innovative two-part design that incorporates a rocking washer to allow the clamp to self-adjust to suit a range of flange thicknesses. Manufactured from low temperature SG iron with a hot dip galvanised finish to provide high performance and anti-corrosion protection in cold environments down to -60°C. |