Lindapter high slip resistance girder clamp type AF medium M24 hot dip galvanized
Note: The images are an indicative representation of the product. Technical details can be found in the sections below.
Product information
| pgb article number | LNAF0001024M6 |
| EAN code | 5051324000226 |
| Alternative article number | AF24M |
| Functional name | Girder clamp |
| Functional name addition | medium |
| Packing type | Factory packing |
| Packaging quantity | 5 |
| Brand name | LINDAPTER |
| Material | Malleable iron |
| Surface | Hot dip galvanized |
| Type | Type AF: medium |
| M | Metric thread | M24 |
| y | 48 | |
| Installation environment | C3 - General outdoor use, 10 km from the coast | |
Advantages
| - High slip resistance evaluated for tensile, frictional and combined load applications |
| - The tail spans slotted clearance holes |
| - Recess holds the bolt head captive (property class 8.8) |
Applications
| - Suitable for parallel and tapered flanges up to and including 10° |
| - 70kN static slip resistance or 250kN tensile (AF24 with 4 x property class 10.9 fasteners) |
| Lindapter recommends the use of DTI Washers conforming to EN14399-9 with the Type AAF. |
| Independently approved for dynamic load applications to EN 1993-1-9. |
| The Type AF girder clamp is used to achieve a fast steelwork fixing connection where high load capacities are present in either tensile, frictional or combined load directions. It has a recessed top to hold the bolt head captive while the nut and washer are tightened down using only one tool, alternatively use a Type AFW washer to convert the recess to a flat top. The skirt on the underside of the clamp abuts the edge of the beam flange and prevents the clamp rotating during installation. Manufactured from SG iron with a hot dip galvanised finish to provide high performance and anti-corrosion protection. |