Lindapter rail clamp BR short M16hot dip galvanized
Note: The images are an indicative representation of the product. Technical details can be found in the sections below.
Product information
| pgb article number | LNBR0001016S6 |
| EAN code | 5051324000981 |
| Alternative article number | BR16SHDG |
| Functional name | Rail clamp |
| Functional name addition | short |
| Packing type | Factory packing |
| Packaging quantity | 50 |
| Brand name | LINDAPTER |
| Material | Malleable iron |
| Surface | Hot dip galvanized |
| Type | Type BR: short |
| M | Metric thread | M16 |
| y | 48 | |
| Installation environment | C3 - General outdoor use, 10 km from the coast | |
Advantages
| - Simple cost effective solution |
| - Flat top allows the bolt head or nut to rotate on a hardened washer |
Applications
| - For low speed rail applications only |
| - For parallel and tapered flanges up to and including 8° |
| The clamp is available in two tail lengths, Short or Medium and can be used with Lindapter packing pieces to increase the clamping range. Choose the correct combination of tail length and packing pieces to suit a specific flange thickness. |
| End plates ensure the clamps and bolts are located in the correct position relative to the supporting steelwork. Location plates are simple fabricated items designed to sit between the two sections to be clamped together to ensure the bolts are fixed at the correct centres. End plates are simple fabricated items that are pre-welded to support frames, bracket or sections, allowing connection to the supporting structure with standard Lindapter clamps. |
| The Type BR rail clamp is used for securing low speed rail with either parallel or tapered flanges up to 8°. It has a flat top to allow the bolt head or nut to rotate on a hardened washer and can also be used with studs, tie rods or J-bolts. The skirt on the underside of the clamp abuts the edge of the beam flange and prevents the clamp rotating during installation. Can also be used to connect low speed rail to concrete with the use of a suitable anchor device for the torque values shown below. Manufactured from malleable iron with zinc plated or hot dip galvanised finish to provide high performance and anti-corrosion protection. |