Lindapter high slip resistance clamp type CF M20 hot dip galvanized
Note: The images are an indicative representation of the product. Technical details can be found in the sections below.
Product information
| pgb article number | LNCF00010206 |
| EAN code | 5051324001827 |
| Alternative article number | CF20 |
| Functional name | Girder clamp |
| Packing type | Factory packing |
| Packaging quantity | 10 |
| Brand name | LINDAPTER |
| Material | Malleable iron |
| Surface | Hot dip galvanized |
| Type | Type CF |
| M | Metric thread | M20 |
| y | 53 | |
| Installation environment | C3 - General outdoor use, 10 km from the coast | |
Advantages
| - High slip resistance evaluated for tensile, frictional and combined load applications |
| - Hooks over flange edge to allow connection of opposing sections |
Applications
| - Suitable for parallel and tapered flanges up to and including 10° |
| Lindapter recommends the use of DTI Washers conforming to EN14399-9 with the Type CF. |
| The Type CF girder clamp is used to achieve a fast steelwork fixing connection where the flanges of steel beams, angles or channels are opposing each other. The high slip resistance clamp is designed to be used in a two clamp configuration and to hook over the edge of the flange. A bolt, threaded rod or other threaded item is used to connect the two clamps and complete the assembly. Type CF can also be combined with our other HSR girder clamp products to make connections from a flange edge to the flat face of a steel section. Manufactured from SG iron with a hot dip galvanised finish to provide high performance and anti-corrosion protection. |