Lindapter girder clamp type A short M10 zinc plated/pc
Note: The images are an indicative representation of the product. Technical details can be found in the sections below.
Product information
| pgb article number | LNA00000110SW1 |
| EAN code |
| Alternative article number | A10S |
| Functional name | Girder clamp |
| Functional name addition | short |
| Packing type | Per piece |
| Packaging quantity | 1 |
| Brand name | LINDAPTER |
| Material | Malleable iron |
| Surface | Zinc plated Cr3+ |
| Type | Type A: short |
| M | Metric thread | M10 |
| y | 20 | |
| Installation environment | C1 - Dry indoor climate | |
Advantages
| - Recessed top holds the bolt captive while the nut is tightened |
Applications
| - Ideal for parallel flanges |
| - Supports up to 78.8kN tensile in a four-bolt configuration |
| The clamp is available in three tail lengths, Short, Medium and Long and can be used with Lindapter packing pieces to increase the clamping range. Choose the correct combination of tail length and packing pieces to suit a specific flange thickness. |
| Independently approved for dynamic load applications to EN 1993-1-9. |
| The Type A girder clamp is used to achieve a fast steelwork fixing connection between two steel beams and is often used in a pair with Type B clamps. It has a recessed top to hold the bolt head captive while the nut and washer are tightened down using only one tool. The skirt on the underside of the clamp abuts the edge of the beam flange and prevents the clamp rotating during installation. Type A girder clamps can also be used on their own if one piece of the steelwork has been pre-drilled. |