Lindapter adjustable girder clamp D2 M16 hot dip galvanized/p
Note: The images are an indicative representation of the product. Technical details can be found in the sections below.
Product information
| pgb article number | LND200010161 |
| EAN code |
| Alternative article number | D216HDG |
| Functional name | Girder clamp |
| Functional name addition | adjustable |
| Packing type | Per piece |
| Packaging quantity | 1 |
| Brand name | LINDAPTER |
| Material | Malleable iron |
| Surface | Hot dip galvanized |
| Type | Type D2 |
| M | Metric thread | M16 |
| d3 | Additional diameter | M 8 |
| y | 30 | |
| Installation environment | C3 - General outdoor use, 10 km from the coast | |
Advantages
| - Recessed top holds the bolt captive while the nut is tightened |
| - The skirt prevents the clamp from rotating during installation |
| - Manual adjustability |
Applications
| - Suitable for parallel and tapered flanges up to and including 5° |
| - Type W washer can be used to fill the recess |
| The Type D2 girder clamp is used to achieve a fast steelwork fixing connection between two steel beams or other steel sections where moderate load capacities are present. The clamp has a Setscrew Tail that can be manually adjusted to allow the clamp to fit a range of flange thicknesses. It has a recessed top to hold the bolt head captive while the nut and washer are tightened down using only one tool. The skirt on the underside of the clamp abuts the edge of the beam flange and prevents the clamp rotating during installation. Suitable for use on parallel and tapered flanges up to 5°. Manufactured from malleable iron and available with a hot dip galvanised or zinc plated finish to provide high performance and anti-corrosion protection. |