Lindapter girder clamp type F9NB No bolt M20 zinc plated/pc
Note: The images are an indicative representation of the product. Technical details can be found in the sections below.
Product information
| pgb article number | LNF9NB001201 |
| EAN code |
| Alternative article number | F920NB |
| Functional name | Girder clamp |
| Packing type | Per piece |
| Packaging quantity | 1 |
| Brand name | LINDAPTER |
| Material | Malleable iron |
| Surface | Zinc plated Cr3+ |
| Type | Type F9NB, without bolt |
| t | Thickness | 25 |
| M | Metric thread | M20 |
| d1 | Inner diameter | 51.0 |
| ts | Clamping thickness | 32-82 |
| d3 | Additional diameter | 48 |
| Installation environment | C1 - Dry indoor climate | |
Advantages
| - Fast, cost effective installation (no location plate required) |
| - Perfect for temporary or permanent use |
Applications
| - Large clamping ranges from 19mm - 95mm (size M10-M24) |
| - Can be used with bolts or threaded rod for supporting pipes etc. |
| - For parallel flanges only |
| Supplied without a metric bolt. |
| The Type F9 girder clamp is used to achieve a fast steelwork fixing connection between two steel beams or other steel sections which run parallel with each other and where the flanges are of the same width. The clamp can be used with bolts or threaded rod and does not require a location plate making it a simple and cost effective solution. Suitable for use only on parallel flanges and applications with low tensile loadings. Manufactured from malleable iron and available with a hot dip galvanised or zinc plated finish to provide high performance and anti-corrosion protection. |