Washer 140HV DIN 125A M 6 BT/30pc
Note: The images are an indicative representation of the product. Technical details can be found in the sections below.
Product information
| pgb article number | GB1125060000 |
| EAN code | 5410439074421 |
| Functional name | Flat washer |
| Packing type | Blister |
| Packaging quantity | 30 |
| Brand name | Pgb-fasteners |
| Material | Steel 140HV |
| Surface | BlackTop coating |
| Type | Type A |
| DIY packaging colour | Green |
| t | Thickness | 1,6 |
| M | Metric thread | M6 |
| d1 | Inner diameter | 6.4 |
| d2 | Outer diameter | 12 |
| Installation environment | C2 - (covered) Outdoor use, no environmental exposure, with visual inspection | |
| Flat washers are commonly used to distribute the load of a fastened joint or prevent loosening from vibration. |
| Din 125A has been replaced by ISO 7089. They are interchangeable. These washers are not chamfered. Nominal diameters of 1,6mm to 64mm (previously 1,6mm to 160mm) were specified. The opening according to ISO standard is defined according to thread diameter (previously DIN according to hole diameter). The washer thickness for nominal sizes M42-M45-M56-M60-M64 have been changed. The hardness class has been limited to 200 HV and 300 HV. 140 HV has been omitted. The indication for zinc flake coatings was added. |
| Superseded 11/2000 |