Retaining ring DIN 472 Ø20 A2(1) 1.4122
Note: The images are an indicative representation of the product. Technical details can be found in the sections below.
Product information
| pgb article number | 000472A0002005 |
| EAN code |
| Functional name | Retaining ring |
| Functional name addition | for bores |
| Packing type | Plastic bag |
| Brand name | Pgb-fasteners |
| Material | Stainless steel 1.4122 (X39CrMo17-1) |
| Surface | Plain |
| d | Diameter | 20.0 |
| t | Thickness | 1 |
| d2 | Outer diameter | 21,92 |
| Groove diameter (d3) | 21.0 | |
| Bore diameter (d) | 20.0 | |
| Installation environment | C1 - Dry indoor climate | |
Advantages
| - These circlips are placed in an internal groove of a bore or hollow cylinder to keep the internal components in position. They are usually installed and removed with special pliers |
Applications
| - Securing internal components |
| - Mechanical engineering and machinery |
| - Automotive applications |
| PGB-FASTENERS internal circlips, also known as retaining rings for bores, are used to hold components inside a bore or hollow cylinder in place, such as in bearings, shafts, or other mechanical parts. The rings are mounted in an internal groove of a bore to prevent components from shifting axially. They are made of spring steel or stainless steel to ensure sufficient strength and resilience. |