Washer ISO7093 M10 HV200 10,5/30/2,5 HDG

Note: The images are an indicative representation of the product. Technical details can be found in the sections below.

Product information

pgb article number	007093210010000303
EAN code	5410439185370

Functional name	Mudguard washer
Packing type	Carton box
Packaging quantity	50
Brand name	Pgb-fasteners
Material	Steel HV 200 (200>300)
Surface	Hot dip galvanized

Request your online user account with pgb.

Technical specifications

t	Thickness	2,5
M	Metric thread	M10
d1	Inner diameter	1.5
d2	Outer diameter	30
	Installation environment	C3 - General outdoor use, 10 km from the coast

Downloads

Technical specifications

09021_TDO.pdf

Extra info

Flat washers are commonly used to distribute the load of a fastened joint or prevent loosening from vibration.

The washer outside diameter 3D from PGB-FASTENERS is available in both steel, stainless steel, brass and nylon PA6 with different surface finishes and in different sizes. This washer allows you to spread the pressure on the workpiece even more when tightening the nut or bolt. It is mainly used for fastenings in wood constructions.

DIN 9021 has been replaced by ISO 7093. They are interchangeable. Nominal sizes M2,5-M7 have been omitted and sizes M27-M33 have been newly added. The washer thickness for nominal size M5 has been changed. The opening according to ISO standard is defined according to thread diameter (previously DIN according to hole diameter). The hardness class has been limited to 200 HV and 300 HV. 140 HV has been omitted.

Superseded 11/2000

Washer ISO7093 M10 HV200 10,5/30/2,5 HDG

Product information

Technical specifications

Recommended related products